Metrel A 1732 DC EVSE Adapter
Designed for use with Metrel MI 3155 EurotestXD
- All measurement can be started and viewed on MI 3155 EurotestXD
- via Bluetooth communication
The Metrel A 1732 EV Testing Adapter is one of only two devices available for testing DC charging stations. The unit boasts several innovative features!
A 1732, a specialised tool designed for electrical safety and functional testing of Electric Vehicle Supply Equipment, in both Mode 4 (DC EVSE) and Mode 3 (AC EVSE) configurations.
It supports a range of connector types, including CCS2, CHAdeMO, and Type 2 AC plugs, making it highly versatile. The A 1732 adapter enables initiation when paired with MI 3155 of communication protocols, such as ISO 15118, DIN 70121, CHAdeMO, and Low-level PWM, and it can also simulate errors on the Control Pilot (CP) signal and Protective Earth (PE) connections to assess EVSE response.
When paired with the MI 3155 EurotestXD installation tester, the A 1732 DC EVSE Adapter can be used to log the charging protocol, perform measurements and testing required for EVSE commissioning and for periodic safety testing.
Shock-proof plastic casing with IP40 protection!
Metrel A 1732 is perfect for the following EVSE applications:
- Functional and electric tests at production stage
- Installation and commissioning
- Periodic testing
- Troubleshooting problems at the EV charge point
Metrel A 1732 Key Feature:
- Test and measurements together with the MI 3155 EurotestXD:
- Asymmetric user-defined IMD testing (20 kΩ and 640 kΩ at 5 kΩ intervals)
- Measuring discharge time
- Measuring residual voltage
- Measuring DC impedance
- Supported charging protocols:
- Supported communication standards:
- CCS DIN 70121
- CCS ISO 15118
- CHAdeMO ver 0.9.1 +
- AC low level IEC 61851-1
- EV battery simulation (300 V at 5 A)
- Power supply (3400 VA, inrush power)
Other Metrel A 1732 Features:
- Functional tests: protocol for measuring voltages and current on the terminals
- Banana test points: DC, AC and PE terminals
- Double PE test terminals: (PE(C) and PE(P)) for a true 4-wire flow measurement
- Overvoltage category: CAT III / 300 V
- Predefined test protocol: DC EVSE in the memory structure
- 4-wire measurements: with 200 mA measuring current
- Insulation resistance: with DC voltage up to 2500 V
- Functional tests:
- with a live view of charge protocol and voltages and currents on the test terminals
- Remote faults: triggering and reaction time measuring
- Asymmetric IMD test: with a setup-able fault resistance between 20 kΩ and 640 kΩ at 5 kΩ intervals
- Programmable AUTO SEQUENCEs: customising the test protocol
What comes with the A 1732?
- Metrel A 1732 DC EVSE Adapter
- (A 1732) DC EVSE adapter
- (A 1781) Test cable, GRY/GRN/BRN, 1.5m, 0.75mm2, CAT IV
- (A 1493) Power cable, 2m, 3x1.5mm2
- (A 1727) USB cable Type A/B