FLUKE i200s AC Current Clamp
The FLUKE i200s AC Current Clamp is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.
FLUKE i200s Key Features:
The FLUKE i200s is compatible with any FLUKE ScopeMeter test tool, Power Harmonics Analyser, Oscilloscope, Multimeter, or other voltage measurement device that has the following features:
- BNC input connector. The Dual Banana to BNC Adapter included in the package, can be used to connect to standard inputs on multimeters
- (For the 120 series ScopeMeters, use the BB120 Shielded Banana to BNC Adapter.)
- Input accuracy of 2% or better to take full advantage of the accuracy of the Current Clamp
- Input impedance of greater than or equal to 1 MΩ, and for full bandwidth and accuracy, a maximum input capacity of 100 pF
- A pass- band of more than four times the frequency of the waveform to be measured
The i200 is compatible with any FLUKE Multimeter or any other current measurement device that has the following features:
- Banana inputs
- Input accuracy of 2% or better to take full advantage of the accuracy of the Current Clamp
- Input impedance of 0.2Ω …15Ω
- A pass-band of more than four times the frequency of the waveform to be measured
FLUKE i200s Compatible With: