• approved distributor

    Buy or Hire Test Equipment
    Repair | Calibrate | Training

  • product advice and demos

    Product advice & demos
    Aftersales support

  • competetive prices

    Competitive quotes
    Bespoke deals

  • approved distributor

    Approved distributor
    Approved service centre

 

Be the first to review this product

Metrel
MI 3109 PRO EurotestPV Solar PV Tester


Metrel MI 3109 EurotestPV Solar PV Tester Sets, perfect for renewable energy sources (STC values & performance of PV panels) & special applications (low voltage photovoltaic installations).

Part Number:
MI3109PRO

read more

 

Need Help ? Contact Us Request Demo
Acutest's Price Promise
  • Competitive quote
  • Expert technical advice/demos
  • Trusted aftercare support

Product Options

 

Manufacturer's RRP

£2198.00
2637.60 incl. VAT)
Add To Cart
  • Competitive quote
  • Expert technical advice/demos
  • Trusted aftercare support

 

 

 

Metrel MI 3109 EurotestPV Solar PV Tester

This photovoltaic (PV) tester performs all necessary tests required for photovoltaic installations.

MI 3109 carries out the tests required by EN 62446, plus I - U characteristic measurements, calculation of STC values as required by EN 61829 and power measurements on Inverter‘s DC and AC sides (single-phase only).

MI 3109 EurotestPV Lite is optimised for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. 

The Metrel MI 3109 is perfect for first inspection of PV systems as well as periodic maintenance tests and evaluation tests or troubleshooting tests.


Metrel MI 3109 Key Features:

  • Insulation and I-U curve measurements in one instrument: with MI 3109 only one instrument is needed to perform insulation measurements with up to 1000V for proofing the PV installation safety and I-U curve measurements needed for evaluation and troubleshooting of PV modules or strings
  • Autotest: This function is intended to perform a complete set of tests according to EN 62446 on PV modules or strings with pressing only one button:
    • insulation resistance between positive output and earth;
    • insulation resistance between negative output and earth;
    • open circuit voltage;
    • short circuit current
  • Calculation to STC values: the measured current and voltage values are, according to environment conditions, recalculated to Standard Test Condition values which makes possible to compare the results of different measurements even if they were taken under different test conditions
  • Efficiency calculations: 2 voltage & 2 current channels for simultaneous AC & DC parameters measurements
  • PV Remote Unit: Optional unit for simultaneous measurements of solar irradiation and temperature of PV module
  • Graphical representation of module’s I - U curve: the I-V characteristic of PV module or string is graphically represented on LCD display
  • Memory: Up to 1800 test results or up to 500 graphical results with timestamp can be stored in internal memory
  • BT connectivity: it enables BT communication with Android tablets and smart phones via optional BT dongle
  • Android application: enables advanced data management APP EuroLink PV
  • PC SW EuroLink PRO enables downloading, uploading, review, analyses and printing of test results


Metrel MI 3109 Applications:

Measurements on DC side of PV installation:

  • Insulation resistance
  • Continuity of PE conductors
  • Uoc (Open Circuit Voltage) and Isc (Short Circuit Current)
  • I - U curve of PV modules and strings
  • Voltage, current and power of strings and inverters
  • Irradiance
  • Module temperature

Measurements on AC side of PV installation:

  • Voltage, current, power
  • Efficiency of PV module, inverter, PV system calculation

Electrical installations:

  • Insulation resistance
  • Continuity of PE conductors
  • Line impedance
  • Loop impedance (sub-functions with high current and without RCD tripping)
  • RCD testing (type AC, A and B)
  • Earth resistance
  • AC current (load and leakage)
  • TRMS voltage, frequency, phase sequence
  • Power, energy, harmonics


What comes with the Metrel MI 3109 Sets?

MI 3109 Standard Set (ST):

  • MI 3109 EurotestPV Lite
  • (A 1289) Soft carrying bag
  • (A 1411) Universal PV test lead, 3 x 1.5 m
  • (A 1412) PV Continuity test lead, 2 x 1.5 m
  • (A 1016 / A 1015 / A 1062) 3 x Test probes (red / blue / green)
  • (A 1064 / A 1310 / A 1309) 3 x Crocodile clips (red / blue / green)
  • (S 2145 PV MC3/4) Male / Female adapters
  • Power supply adapter
  • 6 NiMH batteries (type AA)
  • USB and RS232 - PS/2 cable
  • (A 1707) Carrying strap
  • Calibration certificate
  • Short instruction manual
  • Instruction manual*
  • PC Software SW 0101 EuroLink PRO*

*SW 0101 EuroLink PRO and all documentation can be downloaded free of charge from Metrel Web server or Metrel Documentation center

MI 3109 PRO Set:

  • MI 3109 Standard Set (ST) plus the following extras:
  • (A 1378) EurotestPV Remote
  • (A 1384) PV Safety Probe
  • (A 1427) PV Reference Cell
  • (A 1400) Temperature probe
  • (A 1552) Soft carrying bag
  • PC SW EuroLink PRO Plus licence

*SW 0101 EuroLink PRO and all documentation can be downloaded free of charge from Metrel Web server or Metrel Documentation center

 

Technical Specification for: Metrel MI 3109 PRO EurotestPV Solar PV Tester

Product Downloads

 

 

 

ONLY REGISTERED USERS CAN WRITE REVIEWS. PLEASE SIGN IN OR CREATE AN ACCOUNT