FLUKE 725 Process Calibrator
The FLUKE 725 is a precise and powerful, yet easy-to-use field calibrator. It features broad workload coverage, calibration power and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves and test and calibrate transmitters.
- Measure: volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
- Source/simulate: volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
- Measure/source: pressure using any of the 29 pressure modules
As mentioned the FLUKE 725 Process Calibrator is designed to source mA with simultaneous pressure measurement to conduct valve and I/P tests. It supports flow meter testing with frequency and CPM functions, plus the FLUKE 725 enables fast linearity tests with auto step and auto ramp features.
This unit power transmitters during test using loop supply with simultaneous mA measurement.
What extra do you get with the FLUKE 725 (over the FLUKE 724)?
- With FLUKE 725 Process Calibrator you can measure pressure with FLUKE 700Pxx Pressure Modules
- Source or measure frequency to 10 kHz
- Source mA signals
FLUKE 725 Built For Your Environment:
- This FLUKE 725 is easy to carry - small and streamlined
- Rugged, reliable design stands up to field use
- Backlight lets you work in poor light
- Large battery capacity of four AA cells
- Battery door for easy changes
Other FLUKE 725 Key Features:
- Easy to read measure/source screen lets you view input and output simultaneously
- Remote interface allows benchtop automated operations
- Store frequently-used test setups for later use
- Measure and simulate (12) different thermocouple types and millivolts
- Measure 24 mA, with or without 24 volt loop supply
- Handles pulsed RTD transmitters with pulses >25 ms
- Measure temperature from a thermocouple probe
- Measure temperature from an RTD probe
- Source TC or RTD while measuring volts or mA
- Measure and simulate 7 RTD types
- Measure or source VDC, Ω
- Simulate a thermocouple output
- Simulate an RTD output
- Ramp a temperature signal
- Loop power supply
What comes with the FLUKE 725?
- FLUKE 725 Process Calibrator
- AC72 Alligator Clips
- Stackable Test Leads
- TL75 Test Leads
- User Manuals
- Traceable Calibration Report and Data
▶ Video: FLUKE 725 Process Calibrator
