Metrel MI 3102 BT EurotestXC Multifunction Tester
Metrel MI 3102 BT EurotestXE 2,5 kV is a multifunctional measuring instrument which apart from all the necessary functions for complete installation safety testing according to IEC/EN 61557 performs insulation resistance measurement with the test voltage up to 2,5 kV (measuring range is up to 20 GΩ) and enables diagnostic test by PI and DAR indexes calculation.
MI 3102 BT enables on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement.
This unit is complete with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results.
All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO Software (included in the standard set) to the computer for evaluation and report generation after testing.
Metrel MI 3102 Key Features:
- Predefined mini AUTOSEQUENCEs:
- Auto TT (U, Zln, Zs, Uc)
- Auto TN/RCD (U, Zln, Zs, Rpe)
- Auto TN (U, Zln, Zlpe, Rpe)
- Auto IT (U, Zln, Isc, Isfl, IMD)
- Power measurements and harmonics analysis
- Built-in help screens for referencing on site
- Built-in fuse tables for automatic evaluation of the line / loop impedance result
- On-line voltage monitoring: monitors all 3 voltages in real-time
- Polarity swap: automatic polarity reversal on continuity test
- Trip Lock function: loop impedance test without tripping the RCD
- Built-in charger unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries.
- RCD auto: automated RCD testing procedure
- Bluetooth communication with PC, Android tablets and smart phones via built-in BT
- PC SW EuroLink PRO for downloading of test results and report creation
- EuroLink Android APP, data manaSoftware
Metrel MI 3102 Measuring Functions
- Insulation resistance with DC voltage from 50 V to 1000 V
- Continuity of PE conductors with 200 mA DC test current with polarity change
- Continuity of PE conductors with 7 mA test current without RCD tripping
- Line/Loop impedance
- Loop impedance with Trip Lock RCD function
- TRMS voltage and frequency
- Phase sequence
- Power and harmonics
- RCD testing (general and selective, type AC, A, F, B, B+)
- Earth resistance (3-wire and 2-clamps method)
- Specific earth resistance with Ro-adapter (option)
- TRMS leakage and load currents (option)
- First fault leakage current (ISFL)
- Testing of Insulation Monitoring Devices (IMDs)
- Illumination (option)
Metrel MI 3102 Applications:
- Power Generation - Earthing and lightning protection in thermal energy power plants
- Renewable Energy Sources - Generator stator testing; Lightning protection testing in wind plants; Two clamps method for measuring earth loops in a solar plant
- Industrial Installations - Specific earth resistance measurement methods
- Low Voltage Electrical Installation Safety - Substation electrical safety; Mains bonding and touch voltages during fault; Switchboards and automatic trip-out protection; Public places electrical safety
- Low Voltage Earthing and Lightning Protection - Earthing measurement with fall of potential method; 2-clamps method for measuring lightning and earth protection
- Special Locations - Wet and outdoor locations; IT system; DC installations; EVSE construction and testing
- Mobile Installations - Emergency response vehicles; Telecommunication equipment in mobile installations
- Hospital Earthing and Lightning Protection - Two clamps method for measuring lightning and earth protection; Hospital earthing measurement with fall of potential method; Mains bonding and touch voltages during fault current
- Power Supply and Power Distribution - Hospital switchboards and automatic trip-out protection
- Patient Recovery Rooms and Hospital Wards - Public and workspace electrical safety in healthcare; Electrical safety in hospital wet areas
- Healthcare Secondary Power Sources - Generator safety; Ambulances; Field hospital
What comes with the Metrel MI 3102?
- MI 3102 BT EUROTEST XE 2.5 kV Multifunctional Tester
- Power supply adapter with mains cable
- 6 x NiMH rechargeable batteries (size AA)
- 3 x Test probes (brown, blue, green)
- 3 x Crocodile clips (brown, blue, green)
- USB cable
- RS232 - PS/2 cable
- 3 x Test leads (1.5 m)
- (A 1003) UK measuring cable
- (A 1401) Tip commander with AAA 1.5V battery
- (S 2026 - UK1) Earth test set 3-wire 20 m (4 m test lead, 2 x 20 m test lead, 2 x test rod)
- (A 1289) Soft carrying bag
- Soft carrying neck belt
- PC Software EuroLink PRO
- PC SW MESM PRO licence
- Android App aMESM license
- Calibration certificate
- Short instruction manual
- Instruction manual on storage media
- Handbook on storage media