Metrel MD 9273 Leakage Clamp (Power Functions, BT, TRMS)
The MD 9273 is the new Bluetooth-enabled expansion to the Metrel multifunctional testers MI 3155, MI 3152 and MI 3325. When used together, they form a team for measuring data from a safe distance.
The multifunctional instruments can record inrush current from MD 9273 measurement and display data in table or graph form, or they can be used to generate a 128 Hz signal that MD 9273 can filter and follow for cable tracing.
When acting as a remote probe, it can send data on current, voltage, power, and harmonics. On the other hand, it is an independent instrument with improved accuracy, construction, and new functions like VFD filter. It can accurately read the TRMS AC leakage current of a system, detect losses in the system, suggest possible reasons for the loss, sense the harmonics in the signal, and perform basic power quality tests.
Accurate readings!
Take accurate reading day in, day out: AC current with an accuracy of 0.8 % and a base resolution of 0.01 mA and voltage with an accuracy of 0.5 % and a base resolution of 0.01 V.
Metrel MD 9273 Applications:
- Basic power quality analysis
- Troubleshooting in installations
- Troubleshooting of devices and machines
- Electric vehicles troubleshooting
- General purpose
- Cable tracing
Jaw size: 28 mm diameter
Shielded jaw: shielded jaw allows the clamp meter to be used in the noisiest environments
Metrel MD 9273 Measurements:
- TRMS AC and DC voltage
- TRMS AC current
- Frequency
- VFD frequency and voltage measurement
- Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th.
- Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement)
Metrel MD 9273 Key Functions:
- Bluetooth connection to MI 3155, MI 3152 and MI 3325
- Inrush current recording with MI 3155, MI 3152 and MI 3325
- Online measurements of current, voltage, power, current harmonics, and voltage harmonics
- 128 Hz notch filter for cable tracing
- TRMS: accurate measurements on sinusoidal and non-sinusoidal signals.
- Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss
- THD and PF: dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF)
- Peak value: the peak value of the waveform or crest factor can be displayed
- MAX/MIN/HOLD mode: displays maximum, minimum or last measured value
What comes with the Metrel MD 9273?
- Metrel MD 9273 Leakage Clamp (Bluetooth, TRMS, Power Functions)
- 2 x Test lead with probe
- 2 x AMD 9028 Alligator clip
- 2 x 1.5 V battery (AA)
- Pouch
- Instruction manual
- Calibration certificate