Megger TORKEL 950 Battery Load Tester
The TORKEL 950 is used to perform load/discharge testing to determine battery systems actual capacity.
Together with the cell voltage logger, BVM, now connected directly to the TORKEL 950, it becomes a complete stand-alone discharge test system!
The high discharge capacity of TORKEL gives the opportunity to shorten the test time. Discharging can take place at up to 220 A, and if higher current is needed, two or more TORKEL units or extra load units, TXL, can be linked together.
Tests can be conducted at constant current, constant power, constant resistance or in accordance with a pre-selected load profile. Testing can also be carried out without disconnecting the battery from the equipment it serves. Via a DC clamp-on probe, TORKEL measures the total battery current while regulating it at a constant level. Battery systems can be plus or minus grounded or free floating. The test results can be presented and edited using the PC software TORKEL Viewer (included).
▶ Video: A look at Megger TORKEL battery testers:
Megger TORKEL 950 Key Features:
- Discharge testing for full insight into battery capacity
- On the spot analysis with intuitive analytical abilities built into the unit
- Dynamic discharge technology, full power at all voltages
- Enhanced safety features including spark-free connection and emergency safety fuse
- Ability to test the battery without disconnecting it from the system
- High discharge capacity shortens the test time
- Batteries can be tested in service
- Safety focussed (eg. detection of blocked airflow)
- Real-time monitoring during test
- Easy report function and calibration
- BVM cell monitor control integrated in the system
- Tests can be conducted at constant current, constant power, constant resistance or in accordance with a pre-selected load profile
- 7 inch touch-widescreen
- Easily expandable for larger battery banks using TXL extra load units
What extra features do you get with the TORKEL 950?
The TORKEL 950 model offers the following features over the 930 model:
- Voltage (max) increases to 500 V
See the comparison chart below for the comparison across the TORKEL 900 series.
What comes with the TORKEL 950?
- TORKEL 950 Battery Load Tester
- Mains cable
- (GA-09550) Cable set, 2 x 3 m, 70 mm2
- (2012-18 0) Soft case for cables
- (CS-8010X) TORKEL Viewer
- (HF-10 020) USB memory stick