Megger MFT1735 Multifunction Installation Tester with Bluetooth
The Megger MFT1735 Multifunction Installation Tester has been designed to test low voltage electrical installations to BS 7671. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations.
With IEC 61010 CAT IV 300 V rating for connection to low voltage systems with no protective device, so safe for connection anywhere on the system up to the source transformer without risk of damage from large transient spikes. The MFT1735 casing allows it to be operated while stood on the floor, a ladder-shelf or platform, hung around the neck or hand-held. Dual TEST and LOCK buttons – one pair at each end – make the testers easy to operate with either the left or right hand. Quick to pick up and use, the rotary controls are colour coded to make range selection easy and fast. They also reduce the chance of using the wrong function or range. The large crystal clear backlit display uses the patented Megger digital/analogue arc, providing indication of fluctuating readings while the dual digital readout shows precise values of key measurements simultaneously with the test parameters, such as the output voltage on insulation testing as well as the resistance value in MΩ.
Megger 1735 Key Features:
- Simple colour-coded test selection and large clear backlit display for ease of use
- Two and three wire non-trip loop testing for RCD protected circuits
- Internal memory and Bluetooth communications
- Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
- 3-terminal earth test and stakeless testing for spike resistance measurement
- Supplied with a 3-wire earth test kit, however optional accessories are required for the ART and stakeless techniques
- EN61010 CATIV safety ratings and tough IP54 case
Megger 1735 Applications:
- System voltage and frequency measurement (TRMS)
- Insulation test at 100 V*, 250 V, 500 V and 1000 V
- Including input protection against live circuits up to 600 V even when insulation test is locked-on
- Continuity resistance at 200 mA or 15 mA
- Automatic – no need to press TEST so leaving both hands free to hold probes
- Resistance range up to 100 kΩ
- With fast continuity buzzer and selectable thresholds
- Non-trip loop test
- Earth loop test
- 2 and 3 wire non-trip range
- 2 wire Hi current including phase to phase
- Prospective fault current measurement
- Up to 20 kA
- RCD testing including:
- Type AC, A, S, B* and programmable RCDs
- 1/2 x I, 1 x I and 5 x I3-phase RCDs
- Fast ramp test
- Auto-test routine
- Fault (Touch) voltage display
- Earth testing
- 2-pole
- 3-pole
- ART
- Stakeless techniques
* Reference conditions apply.
What comes with the Megger 1735?
- Megger MFT1735 Multifunction Installation Tester
- Printed Quickstart Guide
- Full User Guide on CD
- Switched Probe SP5
- Neck Strap - Megger embroidered
- 3-wire leadset with prods and clips
- UK mains lead SIA10
- Battery Charger
- Earth Spike Test Kit