FLUKE 1777 Three-Phase Power Quality Analyser
FLUKE 1777 a three-phase Power Quality Analyser eliminates the complexities of power quality logging, troubleshooting, and analysis. Engineered to be the faster, easier way to perform power quality studies, offering automatic measurements, a straightforward user interface and setup, best-in-class specifications, and a simplified reporting platform. The instrument can also be powered directly from the measurement circuit, eliminating the need to find a power outlet or use a lengthy extension cord.
You’ll never miss a critical power quality event - from fast transients up to 8 kV, harmonics up to 30 kHz, dips and swells, as well as the voltage, current, and power measurements that enable you to characterise your electrical system.
▶ Video: Overview of the FLUKE 1777 Power Quality Analyser
FLUKE 1777 Key Features:
- Energy studies - Get detailed power and energy consumption profiles during energy audits and pinpoint savings opportunities
- Measure V, I, kW, Cos/DPF, kWhr
- Measure MIN/MAX and AVG values
- 10 day logging
- Basic harmonics study - Discover the source of distortion in your installation, so that you can filter those loads or move them to separate circuits
- THD measurement (V & I)
- Harmonics 1 to 25 for V & I
- Advanced harmonics study - If distorting loads are causing problems in your installation, you need comprehensive data to identify the source and create a solution
- Full harmonic spectrum
- Power Harmonics
- Basic industrial power quality troubleshooting - When troubleshooting in the field, graphical data enables you to trace the source of the problem at hand
- Oscilloscope function
- Voltage dips and swells
- Advanced power quality troubleshooting - Complex installations often require a deeper dive into measurement data. Multiple loads may be interacting randomly to cause a single problem
- Comprehensive logging capability
- Advanced Features
- Inrush - Discover peak current from load switching
- Flicker - Measure the effects of disturbing switching equipment
- Transients 20 MHz - Capture high speed voltage waveform caused by switching or network disturbances
- Mains signalling - Monitor signals on the network that are used for network wide equipment control
- Event waveform capture - Visualisation of dips and swells to identify the cause of the events
- Communication via USB / Ethernet / Wi-Fi Bluetooth / Wireless download
New updates for the 177X Series has meant the following:
Version 2.0: The new version 2.0 firmware for the FLUKE 177X Series of analysers adds some new features and overall improvements on instrument analysis.
These items include:
- Full/instant on instrument energy measurements (kwh)
- Support of FC enabled Fluke devices
- Support of LTE module
- Instrument screen lock
- Available AC/DC current clamp support (BNC)
This firmware can be used to update any FLUKE 177X instrument, some features will not be enabled in FLUKE 1773 instruments. For further information please get in touch with our friendly team.
What comes with the FLUKE 1777 (Basic)?
- FLUKE-1775 Power Quality Analyser
- 1 x FLUKE-17XX, Flat Cable, Voltage Test Lead 3-Phase+N
- 4 x AC285, Black Alligator Clip
- 1 x AC285, Green Alligator Clip
- 1 x Black 1 M USB-C Cable
- 1 x Line Cord
- 1 x FLK-17XX 0.18 M Test Lead Set (nonstack/stack)
- 1 x Green Test Lead
- 1 x Cable Marker Set (for voltage and current)
- 1 x FLUKE-174X-MA-C8 Wall Outlet Adapter
- 1 x Statement Of Calibration Practices
What extra comes with the iFlex version?
- 4 x i17XX-FLEX1500 24, FLUKE-17XX iFlex 1500 A 24 IN, 2.0 M
- 1 x MP1-3R/1B, Magnet Probe 1, 3 Red / 1 Black Magnet Probes For 4 mm Banana
- 1 x FLUKE-174X-Hanger Kit
- 1 x FLUKE-177X-4204 WI FI / Bluetooth Module
- 1 x Hard Case
▶ Video: Recording Mode FLUKE 1777
▶ Video: Logger Mode FLUKE 1777
▶ Video: Meter Mode FLUKE 1777