Baur BUKCI-3 Live LV Cable Identifier (Low Voltage)
BUKCI-3 connects to live LV Cable at 115V, 230V, or 400V; the transmitter will automatically configure to the connected power.
The system transmitter is connected downstream of the point of interest to draw a complex signal into the cable, and upstream a hand-held receiver analyses the
complex signal. The transmitter may be connected to three phase (for example at a link-box), or phase to phase, or phase-to-neutral and it automatically configures to the connection.
The transmitter is normally connected to all three phases downstream of the test point, and in this mode the receiver indicates a simple "yes" or "no" to the operator. In single-phase or two-phase connection, the receiver will display relative signal strength.
Baur BUKCI-3 Key Features:
- LEDs indicate the supply (115 V, 230 V or 400 V), and the phase rotation
- Simple to use
- Single button control
- Live LV Cable identifier
- Identify live LV cables
- Identify live LV phases
- 3, or 2, or 1 phase connection
- Visual and audible signal
- Show phase rotation
- Simple single button operation
- Self-contained in a single case
- Complete weight: 8kg
Transmitter Features:
- Power:
- Powered from the test connection, no battery
- Phase to phase voltage input range 115V to 400V ac rms +/- 10%
- Auto setting of ac input 115V, 230V, 400V
- Connection: Fused test leads, Cat IV 600V rated
- Dimensions: 40cm x 36cm x 20cm, 8.1kg.
- Protection: IP21
Receiver Features:
- Operation: Hand-held, LCD indicator, single control button
- Power: 2 x 6LR61 batteries
- Dimensions: 25cm x 10cm x 3.5cm, 0.45kg.
- Protection: IP54
What comes with the Baur BUKCI-3?
- Baur BUKCI-3 Complete System (Transmitter and Receiver)
- Connection leads
- Cable ID
- Phase ID sensors
- Instruction booklet